Skip to content

Calibrate your Printer

This calibrations can be done by Mainsail Interface with Macros or on Speeder Pad directly.

  • Start BED PID and save configuration.

  • Start HOTEND PID and save configuration.

  • Calibrate your extruder by calculing Rotation Distance.

  • Start ENDSTOP CALIBRATION and save configuration.

  • Start DELTA CALIBRATION and save configuration.

  • Start BED LEVELING and save configuration.

  • Adjust Z-OFFSET, first you need to move to Z=0 and then adjust nozzle position with a sheet of paper.

  • Note: The Z-Offset is saved in real time including when adjusting babysteps.

If you have an ADXL345 you want to use, you should do that next at ADXL345.